CN
EN
??
Espa?o-
MTF series high precision push-pull force meter MT Characterfistfics ◆ OLED highlights the screen, full-angle display, and rich screen display information.Force; length; date; memory data; positive and negative peaks; progress bar, etc. ◆ The effective sampling frequency is up to 2KHZ, which can be extended to 15KHZ and ultra-high resolution 0.0001N. ◆ Multiple mechanical measurement units (N Mn KN kgf gf lbf, etc.) ◆ Provide positive and negative peak detection ◆ Memory 1000 data; Data can be sent to the computer while the instrument is reme... -
MTA series with displacement push-pull force meter Features: With OLED high-brightness screen, it can be used with equipment to perform multi-parameter display, force-length, torque-angle and so on. Sampling frequency 2KHz, micro power consumption, and hardware and software anti-jamming combination. With input and output functions, the instrument can be extended to a mechanical test platform for various data processing and analysis. The language of the eight countries is universal and accessible. There are USB, RS-232, RS-485 MODBUS protocols connec... -
MTM series built-in sensor push-pull force meter Features: With OLED high-brightness screen, it can be used with equipment to perform multi-parameter display, force-length, torque-angle and so on. Sampling frequency 2KHz, micro power consumption, and hardware and software anti-jamming combination. With input and output functions, the instrument can be extended to a mechanical test platform for various data processing and analysis. The language of the eight countries is universal and accessible. There are USB, RS-232, RS-485 MODBUS protocols connec... -
Z2 series multi-function built-in sensor push pull Parts: AC Adapter Small hook, flat head, convex mouth, concave tip, extended rod, large hook, Y hook Ｉ-1 Ｉ-2 Ｉ-3 Ｉ-4 Ｉ-5 Ｉ-6 Ｉ-7 I-8 （A-1） （A-2） （A-3） （A-4） （A-5） （A-6） Note: series I is made of iron, and series A is made of aluminum.50N and below recommended series A, 100n-1000n recommended I.The hook and y-hook are only used for 1000N testing. USES: 1. Simple determination of tension spring, rubber and other forces. 2. Operation force measurement of ... -
Z2S-DPU series external sensor push-pull meter DPU series sensor use: 1. Simple measurement of the strength of the tension spring and rubber. 2. Measurement of the operating force of the switch button: telephone, computer, remote control. 3. The insertion force and pull-out force of the connector can be tested at the same time. 4. The peak cracking force of new materials such as glass, carbon, ceramics and plastics is captured. 5. Measurement of bending force of thin plates, round bars, wood, etc. 6, peel test: tape, PCB, adhesive ... -
G80 Bench tester 1、 Suitable for aerospace, high-speed trains, new energy sources for automobiles, etc. High precision, high resolution, high sampling rate requirements. 2、 Multi-parameter design (force value, torque, length, angle, pulse, time optional). 3、 Built-in real-time clock for real-time time and date 4、 Peak, real-time values, and test process curves are displayed on the same screen to monitor and trace the entire test process 5、 There is analog real-time signal output (optional). 6、 St...
推薦產(chǎn)品 RECOMMENDED PRODUCTS
- Tel:0086-574-87834466 0086-574-87890640
- Fax:0086-574-87890641
- E-mail:sales@fff-motive.com
- Website:www.vipqq70.com
- Add:No. 999, Mingshu Road, Jiangshan, Ningbo
Share：
